Clearance Fischer UX Universal Wall Plug

Suitable for:
– Concrete
– Prestressed hollow-core concrete slabs
– Natural stone with dense structure
– Solid brick
– Sand-lime solid brick
– Solid block made from lightweight concrete
– Aircrete
– Solid panel made from gypsum
– Vertical perforated brick
– Sand-lime perforated block
– Hollow block made from lightweight concrete
– Slabs made of perforated bricks
– Hollow concrete blocks etc.
– Gypsum plasterboard and gypsum fibreboards
– Chip boards

For fixing of:
– Pictures
– Motion detectors
– Lamps
– Skirting
– Electric switches
– Small wall-mounted shelves
– Towel rails
– Lightweight mirror cabinets
– Letter boxes
– Hanging baskets
– Curtain rails

Features:
– Nylon universal fixing
– Expansion in solid building materials, reliable knot formation in all cavities.
– Use UX 6 long version with fischer spacer screws for maximum load-bearing capacity in perforated materials, double-skinned plasterboard and for bridging non-load-bearing layers.

Advantages / Benefits:
– The unique design enables use in almost all building materials.
– Diagonal connection ridges for optimum screw guidance.
– New saw-tooth anti-rotation lock prevents the fixing rotating in the drill hole.
– Low turning and high tightening torque – the first universal fixing that really "holds".
– Can be used with wood and chipboard screws from 3 mm to 12 mm.
– Integral drive-in lock enables – with pre-assembled screw – optimal push-through installation.
– The collar of the UX R an UX LR prevents it slipping into the drill hole.

Type of installation:
– Flush and push-through installation.

Installation Information:
– With push-through installation, use the largest possible screw diameter.
– Drill only in a rotary motion (switch off hammer) in perforated and hollow brick and aircrete, and use a metal bit for plasterboard.
– If using hook screws and eye screws in cavity bricks, it is essential that they have a collar, so that the screw can be tightened enough to collapse the plug fully.
– The required screw length is given by the fixing length + thickness of the item being attached + 1 x screw diameter.

Technical Data:
Drill diameter – 6mm
Min. drill hole depth – 40mm
Min. panel thickness – 9.5mm
Anchor length – 30mm